RTR-F series used for materials in roll only:
1. Transfer Printing
2. Direct Inks Reactivation
3. Lamination
The characteristics of heating system:
1. Double-layer oil drum, 100% full oil: Surface heat treatment, non-Teflon coating.
2. The cylinder is heated by heating elements and hydrotreated mineral oil, with an extra oil tank to hold thermally expanding heating oil.
3. Blanket coverage at 75%.
4. Overheated alarm on temperature controller(+10℃).
5. Solid state relay for heating control.
6. Carbon brush slip ring: ease of maintenance.
7. Precise temperature control.
8. The rated power of each model:
Manual & Pneumatic tension & pressure control:
1. The rollers for unwinding or rewinding: 3-inch steel roller for roll fabric unwinding and 5 air expansion shafts for others.
2. Tension control for fabric:
Entry: 3-inch steal roller for roll fabric loading and manual biaxial tension bar control.
Exit: Air expansion shaft with disk brake with manual adjustment.
Motor for rewinding, adjustable by speed controller.
3. Tension control for printing paper:
Entry: Air expansion shaft with disk brake with manual adjustment.
Exit: Air expansion shaft with disk brake with manual adjustment.
Motor for rewinding, adjustable by speed controller.
4. Tension control for protective paper:
Entry: Air expansion shaft with disk brake with manual adjustment.
And manual biaxial tension bar control.
Exit: Air expansion shaft with disk brake with manual adjustment.
Motor for rewinding, adjustable by speed controller.
5. NOMEX blanket with pneumatic tension control piston on both sides.
6. Pneumatic transfer pressure system provides more creativity for printing results.
Manual adjuster bolts on both sides for the felt tension rebalance.
Other features that apply on RTR-F series machine:
1. Easy button-operated control panel.
2. Blanket auto centering system:
Omron timer & limit switch control and parameters adjustable on timer.
3. Blanket off tracking alarm system. #Optional feature.
4. Auto power off: One-key automatic shutdown
Controlled by timer, auto cooling off and power auto off.
5. Available for roll materials printing only.
6. 3 unwinding and 3 rewinding shafts.
7. The diameter of the roll materials can be 20~30cm.
8. Pneumatic felt tension and transfer pressure control.
9. Valid for 30 gsm printing paper.
10. The machine runs at full power during the heating up procedure, it takes about 60 minutes. Then power consumption will stay at 70~80% during production.
Oiler for oil drum load bearings lubrication.
Compressed air pressure: 0.6Mpa maximum.
Felt tension at 0.2Mpa maximum.
HS CODE: 8443.3990.00
Request A Quote Today
Please do not hesitate to contact us to get the high quality products and our best service. Eastsign keep here to provide our best!
RELATED PRODUCTS
