| ARISTOMAT |
Outer dimensions➀
WxLxH mm (inch) |
Max. Work area➁
WxL mm (inch) |
| TL 131O-8 |
1920 x 1760 x 1140 (76 x 69 x 45) |
1300 x 1000 (51 x 40) |
| TL 131O-8 Conveyor |
1920 x 2140 x 1140 (76 x 84 x 45) |
1220 x 1000 (48 x 40) |
| TL 1617-8 |
2220 x 2420 x 1140 (87 x 95 x 45) |
1600 x 1700 (63 x 67) |
| TL 1617-8 Conveyor |
2220 x 2800 x 1140 (87 x 110 x 45) |
1520 x 1700 (60 x 67) |
| TL 1625-8 |
2220 x 3220 x 1140 (87 x 127 x 45) |
1600 x 2500 (63 x 100) |
| TL 1625-8 Conveyor |
2220 x 3600 x 1140 (87 x 142 x 45) |
1520 x 2500 (60 x 100) |
| Speed➂ |
max. 1.13 m/s (max. 45 in/sec) |
| Acceleration➂ |
max. 1.15 G |
| Input buffer |
PC controlled |
| Suitable for material thickness |
max. 46 mm (max. 1.8 in), depending on the tool head and protective underlay |
| Static repeatability |
± 0.02 mm/m (0.0008 in/40 in) @ 20 degrees centigrade |
| Control circuit and drives |
Digital AC servo motors |
| Data format |
HPGL compatible, with extended command set |
| Vacuum |
| 1310-8 |
| 1617-8 |
| 1625-8 |
|
| |
| 1.5 kW, 3 kW or 5.5 kW pump system with adjustable matrix vacuum zones |
| 3 kW or 5.5 kW pump system with adjustable matrix vacuum zones |
| 5.5 kW or 2 x 5.5 kW pump system with adjustable matrix vacuum zones |
|
| Power supply |
| 230 V, 50/60 Hz, 16 A with a 1.5 kW pump system; |
| 3-phase fixed connection, 400 V, 50 Hz or 460 V, 60 Hz; |
| 16 A with 3 kW, 20 A with 5.5 kW or 32 A with 2x 5.5 pump system |
|
| Interface |
RS 232C/V.24 |
|
| Universal control software CutterControlPanel for Windows XP/ Vista (32 bit); |
| Multilingual: English, German, French, Italian, Polish, Dutch, Czech, others. |
| Mobile control pad. |
|
| Ambient conditions |
| operating temperatur |
| storage temperatur |
| rel. humidity |
|
| |
| +10°C up to +30°C |
50°F up to |
| -15°C up to +45°C |
5°F up to 113°F |
| 40 - 80% non-condensing |
|
|
| Safety / Certification |
CE-label; Emergency stop; Light barrier; Collision shut-off |
①The dimensions only refer to the basic machines without tool head.②Work area for one tool.
③Depending on cutter size, cutter configuration and tool head |
Options
|
|
 |
Ultrasonics collision shut-off |
|
InfraCrease+TM system for creasingplastics material |
|
Conveyor system for feeding and removing material |
|
Intelligent camera system Automatic Eyefor the exact cutting of printed patterns |
|
Conveyor system with integrated uploading table (PCL machine) |
|
Mobile Barcode Reader for automaticassignment of cutting data |
|
Motorized unwinding device for roll materials |
|
Projection system for simply positioningexpensive materials or remnants |
|
Material clamp system |
|
PC table |
|
SheetFeeder for automatic loading of sheet materialsalso in combination with a motorized unwinding devicefor roll materials |
|
Various tool heads |
| |
|
Aristo-TL-CN.pdf