| ARISTOMAT |
Outer dimensions➀
WxLxH mm (inch) |
Max. Work area➁
WxL mm (inch) |
| GL 2O32-8 |
2660 x 4220 x 1090 (102 x 166 x 43) |
2040 x 3200 (80 x 126) |
| GL 2072-8 |
2660 x 8180 x 1090 (102 x 322 x 43) |
2040 x 7160 (80 x 282) |
| GL 2432-8 |
3020 x 4220 x 1090 (117 x 166 x 43) |
2400 x 3200 (95 x 126) |
| GL 3232-8 |
3800 x 4220 x 1090 (150 x 166 x 43) |
3180 x 3200 (125 x 126) |
| GL 3252-8 |
3800 x 6200 x 1090 (150 x 244 x 43) |
3180 x 5180 (125 x 204) |
| GL 4232-8 |
4890 x 4220 x 1090 (193 x 166 x 43) |
4260 x 3200 (168 x 126) |
| GL 4252-8 |
4890 x 6200 x 1090 (193 x 244 x 43) |
4260 x 5180 (168 x 204) |
Speed➂
GL 2O32-8 and GL 2432-8
all the rest of them |
max. 2.3 m/s (max. 91 in/sec)
max. 1.7 m/s (max. 67 in/sec) |
Acceleration➂
GL 2O32-8 and GL 2432-8
all the rest of them |
max. 2 G
max. 1.15 G |
| Input buffer |
PC controlled |
| Suitable for material thickness |
max. 55 mm (max. 2.16 in) depending on the tool head and protective underlay |
| Static repeatability |
± 0.08 mm/m (0.0032 in/40 in)@20 degrees centigrade |
| Control circuit and drives |
Digital AC servo motors |
| Data format |
HPGL compatible, with extended command set |
| Vacuum |
| GL 20xx, 24xx |
| GL 32xx, 42xx |
|
| |
| 5.5 kW or 2 x 5.5 kW pump systems; adjustable matrix vacuum zones |
| 2 x 5.5 kW or 3 x 5.5 kW pump systems, adjustable matrix vacuum zones |
|
| Power supply |
| 3-phase fixed connection, 400 V, 50 Hz or 460 V, 60 Hz; 20 A with a 5.5 kW pump system, |
| 32 A with a 2x 5.5 kW pump system and 50 A with a 3 x 5.5 kW pump system |
|
| Interface |
RS 232C/V.24 |
|
| Universal control software CutterControlPanel for Windows XP/ Vista (32 bit); |
| Multilingual: English, German, French, Italian, Polish, Dutch, Czech, others. |
| Mobile control pad. |
|
| Ambient conditions |
| operating temperatur |
| storage temperatur |
| rel. humidity |
|
| |
| +10°C up to +30°C |
50°F up to 86°F |
| -15°C up to +45°C |
5°F up to 113°F |
| 40 - 80% non-condensing |
|
|
| Safety / Certification |
CE-label; Emergency stop; Light barrier; Collision shut-off |
①The dimensions only refer to the basic machines without tool head, material transport systems and unloading table.
②Work area for one tool. With machines with conveyor the work width is reduced by 100 mm. Other sizes available on request.
③Available only in connection with relevant options and tool heads. |
Options
|
|
 |
Ultrasonics collision shut-off |
|
Various tool heads |
|
Conveyor system for feeding and removing material(depending on the machine typ) |
|
InfraCrease+TM system for creasingplastics material |
|
Conveyor system with integrated uploading table (PCL machine) |
|
Intelligent camera system Automatic Eyefor the exact cutting of printed patterns |
|
Motorized unwinding device for roll materials |
|
Mobile Barcode Reader for automaticassignment of cutting data |
|
Material clamp system |
|
Projection system for simply positioningexpensive materials or remnants |
|
SheetFeeder for automatic loading of sheet materialsalso in combination with a motorized unwinding devicefor roll materials |
|
|
| |
|
Aristo-GL-CN.pdf